Bricasti M3 voltage

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:

BBCode is ON
[img] is ON
[flash] is ON
[url] is ON
Smilies are ON

Topic review
   

Expand view Topic review: Bricasti M3 voltage

Re: Bricasti M3 voltage

by Airman » Tue Apr 27, 2021 9:53 am

Once again thank you Mr. Brian. Bricasti M3 is such a great streamer/DAC, I'm so happy with it.

Re: Bricasti M3 voltage

by bricastibrian » Sat Apr 24, 2021 2:59 pm

yes they can and there is no issue with warranty

Re: Bricasti M3 voltage

by Airman » Thu Apr 22, 2021 2:55 am

Thank you for your useful information. Can the distributor changes the M3 to 240V for me, and how about warranty after doing this?

Re: Bricasti M3 voltage

by bricastibrian » Wed Apr 21, 2021 3:46 pm

the M3 internal power supplies are linear as such the transformers can be set to run at 220V or 240V nominal nominal AC inlet, and( 120, 200, 100V ), so when set to 220V this is the optimal setting if the power is at 220V for correct power and heat and headroom for low voltage drops. But in this case you are running on the high side meaning it will produce excess current and higher output voltage, which then needs to be regulated down to the correct DC voltage, the excess energy will be dissipated as heat. at 227 this should not be an issue for components, but running up to 235 is questionable and you might consider to do something about it as over time it will stress components and the transformer more, besides the unit getting overall warmer. If set to 240V then it will run cooler, and the power supply is designed such that at the 240V setting there is enough headroom to provide enough current to run down to at least 10-15% below the rated voltage, so when set to 240V tap it can run down to an AC power range of least 215-210 V and not loose regulation. For this reason when we build products for 230V operation they are set to the 240V taps on the transformer and can provide plenty of current at 230V and running a bit cooler. all this considered for the long term you might consider to either do something about your power or change the M3 to 240V.

Bricasti M3 voltage

by Airman » Fri Apr 16, 2021 1:41 am

Dear Mr. Brian,

My Bricasti M3 voltage was preset at 220V. My listening room has voltage around 227V - 235V. So can I use the M3 safely with this voltage, or I need a voltage stabilizer 220V for the M3, please let me know.

Thank you!
313BBDAA-B31D-4078-80EA-42092C2F65AB.jpeg
313BBDAA-B31D-4078-80EA-42092C2F65AB.jpeg (518.04 KiB) Viewed 2500 times

Top